Horn CNC30TBRE Tube Bender Specification - Horn Machine Tools, Inc.

SPECIFICATION	UNIT	CNC30TBRE
Bending Capacity / Round Tube / Mild Steel (S=40kgf/mm²)	mm	30 x 2.0
Bending Capacity / Round Tube / Non-Ferrous (S=25kgf/mm²)	mm	30 x 3.5
Bending Capacity / Round Tube / Stainless (S=60kgf/mm²)	mm	28.6 x 1.3
Bending Capacity / Square Tube / Mild Steel (S=40kgf/mm²)	mm	25.4 x 2.0
Bending Capacity / Solid Bar / Mild Steel (S=40kgf/mm²)	mm	12
Max. Bending Radius	mm	15 ~ 120
Max. Bending Angle	Degree	190
Rolling Capacity / Round Tube / Mild Steel (S=40kgf/mm²)	mm	30 x 2.0
Rolling Capacity / Round Tube / Non-Ferrous (S=25kgf/mm²)	mm	30 x 3.5
Rolling Capacity / Round Tube / Stainless (S=60kgf/mm²)	mm	28.6 x 1.3
Rolling Capacity / Square Tube / Mild Steel (S=40kgf/mm²)	mm	25.4 x 2.0
Rolling Capacity / Solid Bar / Mild Steel (S=40kgf/mm²)	mm	12
Min. Rolling Radius	mm	>=7D
Max. Difference Between two Radii (R2-R1)	mm	40
Max. Length over Mandrel	mm	2800
Max. Pipe O.D./For Repeat Feeding	mm	30
Working Height	mm	1100
Tooling Center Line Height	mm	22.5
DOB (Bending) Speed	deg / sec	176
Accuracy of DOB (Bending)	Degree	±0.01
DBB (Feeding) Speed	mm / sec	730
Accuracy of DBB (Feeding)	mm	±0.1
POB (Rotation) Speed	deg / sec	320
Accuracy of POB (Rotation)	Degree	±0.1
Motor for Hydraulic	Kw	2.2
Total Power	Kw	8.5
Max. Pressure	kgf / cm²	70
Hydraulic Tank Capacity	Liter	80
Machine Length	mm	4400
Machine Width	mm	800
Machine Height	mm	1350
Machine Weight	Kg	1600

M3 Control. PC Based with 15" Color LCD Touch Screen Control.
Right Hand Bending. (Left hand available)
Double Stack Tooling.
Facility for Draw Bending and Push Bending (Rolling).
"Y, B, C & X" axes - AC Servo Motor Drive ("X" = bend head horizontal movement).
"Y" axis alternative Repeat Feeding or Grip End Feeding function.
"C" axis - Electric drive with patented planetary gears assembly for speed reduction and torque transmission.
"Z" axis (Bend head vertical movement) - Patented hydraulic cam lift device.
Powerful carriage motor for push bending applications
Arc curvature software to measure and calculate the radius for push bending.
Metric and Inch setting.
Control with 2-way converting function between XYZ coordinates and YBC working datum.
Parameter control to give interaction between 3 axes (Simultaneous Motion).
Independent programmable speeds Y, B and C axes (10x8).
Hard Disk - Program Storage: Max. 2,000,000 components with up to 30 bends.
USB Flash Drive, CD rom and printer port (printer not included).
Compensation of tube spring back and elongation.
Combine advanced CNC control with driving system, homing procedure is not required on power up.
In auto mode, allows temporary or emergency stop, and ability to keep working the cycle without interruption.
3D graphics simulation of preset bending program.
Maximum 4 different bending projects (programs) to be operated one by one in auto mode. (Multi-part sequence)
Automatic positioning of Y axis in auto mode to ensure quality of work pieces.
Pressure Die assist with adjustable controls
Air Cooling System, Choice WATER or AIR
Automatic Slideway Lubrication to bend arm assembly for helping to reduce maintenance time.
Foot Pedal Cycle Start-E-Stop
Wiper Die Bracket.
3 Mandrel Rods included.
Operator and Maintenance Manuals.
Tool Box with operator tools
Electricity: 480VAC - Different voltages available

M3 Control
PC Based with ADVANTECH 15" Color LCD Touch Screen Control
Window XP operating system.
Part Programs can be stored on the Hard Disk or to a USB drive
Network communication with other computers available.
Ethernet function
Link expansion possible with Measure Center and a Printer function
With D.B.B. alternative interaction follow with or without D.O.B. motion function (Simultaneous motion selector)
With D.B.B. alternative Repeat Feeding or End Grip function (HITCH FEEDING)
With D.B.B. monitoring system with alarms when limit setting are exceeded
Possibility of Sub-Step modify in YBC program
X.Y.Z. to Y.B.C. conversion
Metric and Inch setting
Input and Output display for checking malfunction
Elongation and Springback compensation setting
With individual parameter to determine the interaction between 3 axis
With independent programming continuous speeds, Y, B and C axes (10x8)
Automatic programming for making Mirror Image parts
Displays and Rotates parts in 3D
Multisequence option for producing different part sharing the same tube and same bending radius (four files each time)
Possibility of recovery of the piece being processed after accidental or intentional stopping of the cycle
Program up to 30 Bends per parts x 2,000,000 Parts memory
Advanced self diagnostics
Simultaneous editing of a part while the bending is running Production
Parts counter capability
English and Chinese language display

Optional Features
Dynamic Simulation Software: allows programmer to watch part being formed on the PC before attempting to run on machine. Helps to quickly indentify interferences in the program.
Communication software: allows other devices to be connected to the machine computer through a network
CE Mark: For applications requiring the CE mark be place on machine
Safety Floor Mats or Scanner: Choice of either system

M3 Control Console

Bending Capacity may vary depending on OD, WT, CLR and Material.
The general information in this document is not binding in details.
Horn Machine Tools, Inc. retains the right to amend designs from time to time without prior notice.

Horn CNC30TBRE Specification