Horn CNC80TSR Tube Bender Specification - Horn Machine Tools, Inc.

* 1 x diameter bending capable with RBE or RBH (Rear Boost)
SPECIFICATION	UNIT	CNC80TBRE
Bending Capacity / Round Tube / Mild Steel (S=40kgf/mm²)	mm	80 x 4.5
Bending Capacity / Round Tube / Non-Ferrous (S=25kgf/mm²)	mm	80 x 9.0
Bending Capacity / Round Tube / Stainless (S=60kgf/mm²)	mm	80 x 3.2
Bending Capacity / Square Tube / Mild Steel (S=40kgf/mm²)	mm	60 x 4.5
Bending Capacity / Solid Bar / Mild Steel (S=40kgf/mm²)	mm	35
Max. Bending Radius	mm	40 ~ 250
Max. Bending Angle	Degree	190
Max. Difference Between two Radii (R2-R1)	mm	NA
Max. Length over Mandrel	mm	3000
Max. Pipe O.D./For Repeat Feeding	mm	68
Working Height	mm	1200
Tooling Center Line Height	mm	55
DOB (Bending) Speed	deg / sec	35
Accuracy of DOB (Bending)	Degree	±0.1
DBB (Feeding) Speed	mm / sec	900
Accuracy of DBB (Feeding)	mm	±0.1
POB (Rotation) Speed	deg / sec	240
Accuracy of POB (Rotation)	Degree	±0.1
Motor for Hydraulic	Kw	12
Total Power	Kw	15
Max. Pressure	kgf / cm²	175
Hydraulic Tank Capacity	Liter	200
Machine Length	mm	5500
Machine Width	mm	1500
Machine Height	mm	1500
Machine Weight	Kg	4000

M3 Control. PC Based with 15" Color LCD Touch Screen Control.
Right Hand Bending. (Left hand available)
Single Stack Tooling.
Facility for Draw Bending with normal features, mandrel, wiper and PDA.
"Y & B" axes - AC Servo Motor Drive.
"Y" axis alternative Repeat Feeding or Grip End Feeding function.
"C" axis - Hydraulic drive bending arm.
Optional Rear Booster for tight radius bending.
Metric and Inch setting.
Control with 2-way converting function between XYZ coordinates and YBC working datum.
Parameter control to give interaction between 3 axes (Simultaneous Motion).
Independent programmable speeds Y, B and C axes (10x8).
Hard Disk - Program Storage: Max. 2,000,000 components with up to 30 bends.
USB Flash Drive, CD rom and printer port (printer not included).
Compensation of tube spring back and elongation.
Combine advanced CNC control with driving system, homing procedure is not required on power up.
In auto mode, allows temporary or emergency stop, and ability to keep working the cycle without interruption.
3D graphics simulation of preset bending program.
Maximum 4 different bending projects (programs) to be operated one by one in auto mode. (Multi-part sequence)
Automatic positioning of Y axis in auto mode to ensure quality of work pieces.
Pressure Die assist with adjustable controls
Water Cooling System, Optional AIR system.
Automatic Slideway Lubrication to bend arm assembly for helping to reduce maintenance time.
Foot Pedal Cycle Start-E-Stop
Wiper Die Bracket.
3 Mandrel Rods included.
Operator and Maintenance Manuals.
Tool Box with operator tools
Electricity: 480VAC - Different voltages available

M3 Control
PC Based with ADVANTECH 15" Color LCD Touch Screen Control
Window XP operating system.
Part Programs can be stored on the Hard Disk or to a USB drive
Network communication with other computers available.
Ethernet function
Link expansion possible with Measure Center and a Printer function
With D.B.B. alternative interaction follow with or without D.O.B. motion function (Simultaneous motion selector)
With D.B.B. alternative Repeat Feeding or End Grip function (HITCH FEEDING)
With D.B.B. monitoring system with alarms when limit setting are exceeded
Possibility of Sub-Step modify in YBC program
X.Y.Z. to Y.B.C. conversion
Metric and Inch setting
Input and Output display for checking malfunction
Elongation and Springback compensation setting
With individual parameter to determine the interaction between 3 axis
With independent programming continuous speeds, Y, B and C axes (10x8)
Automatic programming for making Mirror Image parts
Displays and Rotates parts in 3D
Multisequence option for producing different part sharing the same tube and same bending radius (four files each time)
Possibility of recovery of the piece being processed after accidental or intentional stopping of the cycle
Program up to 30 Bends per parts x 2,000,000 Parts memory
Advanced self diagnostics
Simultaneous editing of a part while the bending is running Production
Parts counter capability
English and Chinese language display

Optional Features
Dynamic Simulation Software: allows programmer to watch part being formed on the PC before attempting to run on machine. Helps to quickly indentify interferences in the program.
Communication software: allows other devices to be connected to the machine computer through a network
CE Mark: For applications requiring the CE mark be place on machine
Safety Floor Mats or Scanner: Choice of either system

M3 Control Console

Bending Capacity may vary depending on OD, WT, CLR and Material.
The general information in this document is not binding in details.
Horn Machine Tools, Inc. retains the right to amend designs from time to time without prior notice.

Horn CNC80TSR Specification